| Parameter | Value |
|---|---|
| Hardware QTouch Acquisition | No |
| Pin Count | 64 |
| Operating Voltage (Vcc) | 2.7 to 5.5 |
| Analog Comparators | 1 |
| PWM Channels | 9 |
| Graphic LCD | No |
| Timers | 4 |
| 32kHz RTC | Yes |
| Max. Operating Frequency | 16 MHz |
| USB Speed | Full Speed |
| TWI (I2C) | 1 |
| MPU / MMU | no / no |
| FPU | No |
| Crypto Engine | No |
| CPU | 8-bit AVR |
| Temp. Range (deg C) | -40 to 85 |
| Camera Interface | No |
| EEPROM (Bytes) | 2048 |
| Video Decoder | No |
| ADC channels | 8 |
| Calibrated RC Oscillator | Yes |
| UART | 1 |
| SPI | 2 |
| Output Compare channels | 10 |
| picoPower | No |
| Flash (Kbytes) | 64 Kbytes |
| USB Interface | Device |
| NAND Interface | No |
| SRAM (Kbytes) | 4 |
| Temp. Sensor | No |
| ADC Speed (ksps) | 15 |
| External Bus Interface | 0 |
| Input Capture Channels | 1 |
| Resistive Touch Screen | No |
| DAC Resolution (bits) | 0 |
| Max I/O Pins | 48 |
| Ext Interrupts | 16 |
| Self Program Memory | YES |
| I/O Supply Class | 2.7 to 5.5 |
| ADC Resolution (bits) | 10 |
| # of Touch Channels | 16 |
| DRAM Memory | No |
| USB Transceiver | 1 |
| 系列 | AVR® 90USB |
| 核心处理器 | AVR |
| 芯体尺寸 | 8-Bit |
| 速度 | 16MHz |
| RAM容量 | 4K x 8 |
| 程序存储器类型 | FLASH |
| 程序存储器容量 | 64KB (64K x 8) |
| EEPROM 大小 | 2K x 8 |
| 输入/输出数 | 48 |
| 振荡器型 | Internal |
| 数据转换器 | A/D 8x10b |
| 连通性 | EBI/EMI, I²C, SPI, UART/USART, USB, USB OTG |
| 工作电压 | 2.7 V ~ 5.5 V |
| 工作温度 | -40°C ~ 85°C |
| 周边设备 | Brown-out Detect/Reset, POR, PWM, WDT |
The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 64KB ISP flash memory with read-while-write capabilities, 2KB EEPROM, 4KB SRAM, 48 general purpose I/O lines, 32 general purpose working registers, real time counter, 4 flexible timer/counters with compare modes and PWM, USART, byte oriented 2-wire serial interface, USB 2.0 low-speed and full-speed device an 8-channel 10-bit A/D converter with optional differential input stage with programmable gain, programmable watchdog timer with internal oscillator, SPI serial port, JTAG (IEEE 1149.1 compliant) interface for on-chip debugging, and six software selectable power saving modes.
By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processor speed.
| No. | Description | |
|---|---|---|
| 1 |
 文档(Document)
|
深圳市科通技术股份有限公司 consumer hotline：(+86)755-26018083 mail：cs@comtech.cn
© Copyright 2018 www.comtech.cn | 粤ICP备19161615号 |
