| Parameter |
Value |
| FPU |
No |
| Ext Interrupts |
32 |
| Self Program Memory |
NO |
| Operating Voltage (Vcc) |
3.0 to 3.6 |
| PWM Channels |
4 |
| picoPower |
No |
| Timers |
3 |
| SSC |
1 |
| I/O Supply Class |
1.8/3.3 |
| Video Decoder |
No |
| USB Interface |
Device |
| Temp. Sensor |
No |
| USB Transceiver |
1 |
| Crypto Engine |
No |
| SPI |
1 |
| Max I/O Pins |
32 |
| Temp. Range (deg C) |
-40 to 85 |
| Camera Interface |
No |
| Graphic LCD |
No |
| Flash (Kbytes) |
256 Kbytes |
| MPU / MMU |
no / no |
| External Bus Interface |
0 |
| CPU |
ARM7TDMI |
| Output Compare channels |
3 |
| Hardware QTouch Acquisition |
No |
| Pin Count |
64 |
| 32kHz RTC |
Yes |
| Max. Operating Frequency |
55 MHz |
| USB Speed |
Full Speed |
| ADC channels |
8 |
| DRAM Memory |
No |
| SRAM (Kbytes) |
64 |
| ADC Speed (ksps) |
384 |
| Calibrated RC Oscillator |
No |
| Resistive Touch Screen |
No |
| DAC Resolution (bits) |
0 |
| UART |
3 |
| EEPROM (Bytes) |
0 |
| ADC Resolution (bits) |
10 |
| TWI (I2C) |
1 |
| NAND Interface |
No |
| Input Capture Channels |
3 |
A member of the Atmel® SAM7S series of flash microcontrollers based on the 32-bit ARM7TDMI® RISC processor. It operates at a maximum speed of 55MHz and features 128KB of flash and 64KB of SRAM. The peripheral set includes a FS USB device and Phy at 12Mbps, UART, two USARTs, TWI, SPI, SSC, two PWM timers, three 16-bit timers, RTT, 8x10-bit ADC and 32 IO lines. It achieves single-cycle instruction access from embedded flash at 27 MIPS. The multi-layer bus matrix, multiple SRAM banks, PDC, and DMA support parallel tasks and maximize data throughput. The SAM7S256 operates from 1.65V to 3.6V and is available in 64-pin LQFP and QFN packages.
BuildingAutomation: 舒适性与控制, 消防与安全
IndustrialAutomation: PLC 和 I/O 模块, 仪表
Metering: 电表
MobileElectronics: 便携式音频播放器
