| Parameter | Value |
|---|---|
| Resistive Touch Screen | No |
| CPU | 32-bit AVR |
| Temp. Range (deg C) | -40 to 85 |
| Timers | 10 |
| I/O Supply Class | 3.0-3.6 or (1.65-1.95+3.0-3.6) |
| DRAM Memory | No |
| SRAM (Kbytes) | 16 |
| External Bus Interface | 0 |
| Calibrated RC Oscillator | Yes |
| Output Compare channels | 16 |
| Ext Interrupts | 28 |
| picoPower | No |
| 32kHz RTC | Yes |
| Max. Operating Frequency | 60 MHz |
| EEPROM (Bytes) | 0 |
| Video Decoder | No |
| MPU / MMU | Yes / No |
| NAND Interface | No |
| Temp. Sensor | No |
| FPU | No |
| DAC Resolution (bits) | 0 |
| UART | 2 |
| Crypto Engine | No |
| Max I/O Pins | 28 |
| Self Program Memory | YES |
| Camera Interface | No |
| ADC Resolution (bits) | 10 |
| ADC channels | 6 |
| # of Touch Channels | 32 |
| TWI (I2C) | 1 |
| USB Transceiver | 1 |
| Input Capture Channels | 6 |
| SPI | 3 |
| Hardware QTouch Acquisition | No |
| Pin Count | 48 |
| Operating Voltage (Vcc) | 3.0-3.6 or (1.65-1.95+3.0-3.6) |
| PWM Channels | 13 |
| Graphic LCD | No |
| USB Speed | Full Speed |
| Flash (Kbytes) | 64 Kbytes |
| USB Interface | Device |
| ADC Speed (ksps) | 384 |
| 系列 | AVR®32 UC3 |
| 核心处理器 | AVR |
| 芯体尺寸 | 32-Bit |
| 速度 | 60MHz |
| RAM容量 | 16K x 8 |
| 程序存储器类型 | FLASH |
| 程序存储器容量 | 64KB (64K x 8) |
| 输入/输出数 | 28 |
| 振荡器型 | Internal |
| 数据转换器 | A/D 6x10b |
| 连通性 | I²C, IrDA, SPI, SSC, UART/USART, USB |
| 工作电压 | 1.65 V ~ 1.95 V |
| 工作温度 | -40°C ~ 85°C |
| 周边设备 | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
The high-performance, low-power 32-bit AVR RISC-based microcontroller combines 64KB flash memory, 32KB SRAM, full-speed (12 Mbps) USB Mini-host + device, and I2S. The MCU achieves 83 Dhrystone MIPS (DMIPS) at 60MHz and consumes only 23mA at 3.3 volts.
The microcontroller's Memory Protection Unit (MPU) and fast, flexible interrupt controller support the latest real-time operating systems. The Peripheral Direct Memory Access (PDMA) controller transfers data between peripherals and memories without processor involvement, drastically reducing processing overhead with large continuous data streams between MCU modules.
The power manager improves design flexibility and security: the on-chip brown-out detector monitors the power supply, the CPU is run by the on-chip RC oscillator or one of external oscillator sources, and the Real-Time Clock (RTC) and its associated timer track time.
| No. | Description | |
|---|---|---|
| 1 |
 文档(Document)
|
深圳市科通技术股份有限公司 consumer hotline：(+86)755-26018083 mail：cs@comtech.cn
© Copyright 2018 www.comtech.cn | 粤ICP备19161615号 |
